Usbmount Ntfs-3g Patch

Mount is denied because setuid and setgid root ntfs-3g is insecure with the external FUSE or rebuild NTFS-3G with integrated FUSE support and make it setuid root. Please see Code: Select all: apt-get update apt-get.

Jun 27, 2010 - Bug 587311: usbmount does not mount ntfs drives with ntfs-3g after I added the patch slightly modified: just change the fstype variable.

Buildroot is a tool that simplifies and automates the process of building a complete Linux system for an embedded system, using cross-compilation.

Udev provides a means of dynamically creating devices in /dev. Kernnel 2.6 and above. However, I have also had this working on 2.4.20 Installation and configuration To install, under Debian distribution, type: apt-get install udev This also requires the legacy hotplug but this is slowly being removed. udev establishes a directory /etc/udev. Within this are the configration files and rules for udev. The configuration file udev.conf can be left as installed. The rules (udev.rules and directory rules.d) will be left to the user to edit depending on the devices being used. The rules detail what is to happen on detection of certain hardware types. Descriptions can use manufacturers names or device code, pretty much anything really and wild cards can also be used. This can then indicate what kernel modules are required, permissions and launched scripts. Another directory, /etc/dev.d is also created. This contains directorys pertaining to the type of device, say block for a scsi based device. This directory contains a file (extension of .dev) which is the script that is auto run on detection of the device. This script will perform actions depending on if the device has been 'added' or 'removed'. Example uses For 'hotplug' USB devices, install usbmount: apt-get install usbmount This installs a udev script at /etc/dev.d/block/usbmount.dev and also a bash script in /usr/sbin. A configuration file is used to determine where the media is to be mounted, defaults to /media/usb1..9. udev will auto-detect the drive and the usbmount script will mount each detected partition at /media/usb1, /media/usb2, ... On removal, the drive will be un-mounted and the device node removed. The current version of usbmount does not support NTFS-3G. It will always use the kernel NTFS driver that has some drawbacks writing to NTFS volumes. Applying the following patch to usbmount allows you to specify a new configuration variable USE_NTFS3G in /etc/usbmount/usbmount.conf. If this variable is set to "yes", then usbmount will utilize NTFS-3G instead of the kernel mode NTFS driver. diff -Naur /usr/share/usbmount.old/usbmount /usr/share/usbmount/usbmount --- /usr/share/usbmount.old/usbmount 2007-01-27 12:22:14.000000000 +0100 +++ /usr/share/usbmount/usbmount 2007-11-05 08:02:24.000000000 +0100 @@ -45,6 +45,7 @@ MOUNTOPTIONS="" FS_MOUNTOPTIONS="" VERBOSE="no" +USB_NTFS3G="no" # Read configuration file. if test -r /etc/usbmount/usbmount.conf; then @@ -119,7 +120,11 @@ # Mount the filesystem. log info "executing command: mount -t$fstype ${options:+-o$options} $DEVNAME $mountpoint" - mount "-t$fstype" "${options:+-o$options}" "$DEVNAME" "$mountpoint" + if test $fstype == "ntfs" && expr "$USE_NTFS3G" : "[yY]" > /dev/null; then + mount "-tntfs-3g" "${options:+-o$options}" "$DEVNAME" "$mountpoint" + else + mount "-t$fstype" "${options:+-o$options}" "$DEVNAME" "$mountpoint" + fi # Determine vendor and model. vendor= @@ -166,6 +171,11 @@ elif test "$1" = remove; then + # if we utilize ntfs-3g, we need to add the fuseblk fstype to allow proper unmounting + if [ `expr "$USE_NTFS3G" : "[yY]"` -eq "1" ]; then + FILESYSTEMS="$FILESYSTEMS fuseblk" + fi + # A block or partition device has been removed. # Test if it is mounted. while read device mountpoint fstype remainder; do And what should you do with this patch? Just copy & past the patch source code from above into your favorite editor and save it as "usbmount-ntfs3g.patch". Now transfer the file to your LS. After this, apply the patch as user root issuing the command patch /usr/share/usbmount/usbmount /usbmount-ntfs3g.patch Thats it!

Jun 27, 2010 - Package: usbmount Version: 0.0.20 Severity: normal Tags: patch I followed the readme and added fuseblk to the list of filesystems. Fuse and.

Udev provides a means of dynamically creating devices in /dev

Jun 27, 2010 - Severity: normal. Tags: patch. Found in version usbmount/0.0.20. Fixed in version usbmount/0.0.21. Done: Rogério Brito rbrito ime.usp.br.

This is the config file for buildroot-2009.11 for: 1.arm926t 2. EABI 3. BusyBox 1.15.x 4. Kernel Headers Linux 2.6.30.x kernel headers 5. UClibc C library Version.

this is the config file for buildroot-2009.11 for: 1.arm926t 2. EABI 3. BusyBox 1.15.x 4. Kernel Headers (Linux 2.6.30.x kernel headers) 5. uClibc C library Version (uClibc 0.9.30) 6.Binutils Version (binutils 2.19) 7. GCC compiler Version (gcc 4.3.4) now has successfully generated rootfs of ext2 and ubifs. as353x_config # # Automatically generated make config: don't edit # Fri Feb 19 14:23:35 2010 # BR2_HAVE_DOT_CONFIG=y BR2_VERSION="2009.11" # BR2_alpha is not set BR2_arm=y # BR2_armeb is not set # BR2_avr32 is not set # BR2_cris is not set # BR2_ia64 is not set # BR2_i386 is not set # BR2_m68k is not set # BR2_mips is not set # BR2_mipsel is not set # BR2_nios2 is not set # BR2_powerpc is not set # BR2_sh is not set # BR2_sh64 is not set # BR2_sparc is not set # BR2_sparc64 is not set # BR2_x86_64 is not set # BR2_xtensa is not set # BR2_generic_arm is not set # BR2_arm7tdmi is not set # BR2_arm610 is not set # BR2_arm710 is not set # BR2_arm720t is not set # BR2_arm920t is not set # BR2_arm922t is not set BR2_arm926t=y # BR2_arm10t is not set # BR2_arm1136jf_s is not set # BR2_arm1176jz_s is not set # BR2_arm1176jzf_s is not set # # cortex-A8 needs gcc >= 4.4.x # # BR2_cortex_a8 is not set # BR2_sa110 is not set # BR2_sa1100 is not set # BR2_xscale is not set # BR2_iwmmxt is not set BR2_ARM_TYPE="ARM926T" BR2_ARM_EABI=y # BR2_ARM_OABI is not set BR2_ARCH="arm" BR2_ENDIAN="LITTLE" BR2_GCC_TARGET_TUNE="arm9tdmi" BR2_GCC_TARGET_ARCH="armv5te" BR2_GCC_TARGET_ABI="aapcs-linux" # # Target options # # # Preset Devices # # BR2_TARGET_ARMLTD is not set # BR2_TARGET_ATMEL is not set # BR2_TARGET_KWIKBYTE is not set # # Generic System Support # # BR2_TARGET_GENERIC_ACCESS_POINT is not set # BR2_TARGET_GENERIC_FIREWALL is not set # # Generic development system requires a toolchain with WCHAR and PROGRAM_INVOCATION support # BR2_TARGET_GENERIC_HOSTNAME="as353x" BR2_TARGET_GENERIC_ISSUE="Welcome to AS353X" BR2_TARGET_GENERIC_GETTY=y # BR2_TARGET_GENERIC_GETTY_NONE is not set # BR2_TARGET_GENERIC_GETTY_TTYS0 is not set # BR2_TARGET_GENERIC_GETTY_TTYS1 is not set # BR2_TARGET_GENERIC_GETTY_TTYS2 is not set # BR2_TARGET_GENERIC_GETTY_TTYS3 is not set # BR2_TARGET_GENERIC_GETTY_TTYAMA0 is not set # BR2_TARGET_GENERIC_GETTY_TTYAMA1 is not set # BR2_TARGET_GENERIC_GETTY_TTYAMA2 is not set # BR2_TARGET_GENERIC_GETTY_TTYAMA3 is not set BR2_TARGET_GENERIC_GETTY_TTYSAC0=y # BR2_TARGET_GENERIC_GETTY_TTYSAC1 is not set # BR2_TARGET_GENERIC_GETTY_TTYSAC2 is not set # BR2_TARGET_GENERIC_GETTY_TTYSAC3 is not set # BR2_TARGET_GENERIC_GETTY_TTYMXC0 is not set # BR2_TARGET_GENERIC_GETTY_TTYMXC1 is not set # BR2_TARGET_GENERIC_GETTY_TTYMXC2 is not set # BR2_TARGET_GENERIC_GETTY_TTYUL0 is not set # BR2_TARGET_GENERIC_GETTY_TTYUL1 is not set # BR2_TARGET_GENERIC_GETTY_TTYUL2 is not set # BR2_TARGET_GENERIC_GETTY_TTYUL3 is not set # BR2_TARGET_GENERIC_GETTY_TTYPSC0 is not set # BR2_TARGET_GENERIC_GETTY_TTYPSC1 is not set # BR2_TARGET_GENERIC_GETTY_TTYPSC2 is not set # BR2_TARGET_GENERIC_GETTY_TTYPSC3 is not set # BR2_TARGET_GENERIC_GETTY_TTYCPM0 is not set # BR2_TARGET_GENERIC_GETTY_TTYCPM1 is not set # BR2_TARGET_GENERIC_GETTY_TTYCPM2 is not set # BR2_TARGET_GENERIC_GETTY_TTYCPM3 is not set BR2_TARGET_GENERIC_GETTY_PORT="ttySAC0" # BR2_TARGET_GENERIC_GETTY_BAUDRATE_KEEP is not set # BR2_TARGET_GENERIC_GETTY_BAUDRATE_9600 is not set # BR2_TARGET_GENERIC_GETTY_BAUDRATE_19200 is not set # BR2_TARGET_GENERIC_GETTY_BAUDRATE_38400 is not set # BR2_TARGET_GENERIC_GETTY_BAUDRATE_57600 is not set BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y BR2_TARGET_GENERIC_GETTY_BAUDRATE="115200" # # Build options # BR2_WGET="wget --passive-ftp -nd" BR2_SVN_CO="svn co" BR2_SVN_UP="svn up" BR2_BZR_CO="bzr co" BR2_BZR_UP="bzr up" BR2_GIT="git clone" BR2_ZCAT="gzip -d -c" BR2_BZCAT="bzcat" BR2_TAR_OPTIONS="" BR2_DL_DIR="$(TOPDIR)/dl" BR2_COPYTO="" # # Mirrors and Download locations # BR2_PRIMARY_SITE="" BR2_SOURCEFORGE_MIRROR="easynews" BR2_STAGING_DIR="$(BASE_DIR)/staging" BR2_GNU_BUILD_SUFFIX="pc-linux-gnu" BR2_GNU_TARGET_SUFFIX="linux-uclibcgnueabi" BR2_JLEVEL=1 # BR2_PREFER_IMA is not set # BR2_DEPRECATED is not set BR2_RECENT=y BR2_CONFIG_CACHE=y # BR2_ENABLE_DEBUG is not set BR2_STRIP_strip=y # BR2_STRIP_sstrip is not set # BR2_STRIP_none is not set # BR2_OPTIMIZE_0 is not set # BR2_OPTIMIZE_1 is not set # BR2_OPTIMIZE_2 is not set # BR2_OPTIMIZE_3 is not set BR2_OPTIMIZE_S=y # BR2_PREFER_STATIC_LIB is not set # BR2_HAVE_MANPAGES is not set # BR2_HAVE_INFOPAGES is not set # BR2_HAVE_DOCUMENTATION is not set # BR2_HAVE_DEVFILES is not set BR2_UPDATE_CONFIG=y # # Toolchain # BR2_TOOLCHAIN_BUILDROOT=y # BR2_TOOLCHAIN_EXTERNAL is not set # BR2_TOOLCHAIN_EXTERNAL_SOURCE is not set BR2_TOOLCHAIN_SOURCE=y BR2_EXT_GCC_VERSION_4_1_2=y BR2_EXT_GCC_VERSION_4_2_1=y BR2_EXT_GCC_VERSION_4_2_2=y BR2_EXT_GCC_VERSION_4_2_3=y BR2_EXT_BINUTILS_VERSION_2_17=y BR2_EXT_BINUTILS_VERSION_2_18=y BR2_EXT_UCLIBC_VERSION_0_9_28_3=y BR2_EXT_UCLIBC_VERSION_0_9_29=y BR2_EXT_UCLIBC_VERSION_0_9_30=y BR2_EXT_UCLIBC_VERSION_0_9_30_1=y # # Kernel Header Options # # BR2_KERNEL_HEADERS_2_6_26 is not set # BR2_KERNEL_HEADERS_2_6_27 is not set # BR2_KERNEL_HEADERS_2_6_28 is not set # BR2_KERNEL_HEADERS_2_6_29 is not set BR2_KERNEL_HEADERS_2_6_30=y # BR2_KERNEL_HEADERS_2_6_31 is not set # BR2_KERNEL_HEADERS_VERSION is not set # BR2_KERNEL_HEADERS_SNAP is not set BR2_DEFAULT_KERNEL_HEADERS="2.6.30.9" # # uClibc Options # # BR2_UCLIBC_VERSION_0_9_28_3 is not set # BR2_UCLIBC_VERSION_0_9_29 is not set BR2_UCLIBC_VERSION_0_9_30=y # BR2_UCLIBC_VERSION_0_9_30_1 is not set # BR2_UCLIBC_VERSION_SNAPSHOT is not set BR2_UCLIBC_VERSION_STRING="0.9.30" BR2_UCLIBC_CONFIG="toolchain/uClibc/uClibc-0.9.30.config" # BR2_PTHREAD_DEBUG is not set # BR2_UCLIBC_INSTALL_TEST_SUITE is not set # # Binutils Options # # BR2_BINUTILS_VERSION_2_17 is not set # BR2_BINUTILS_VERSION_2_17_50_0_17 is not set # BR2_BINUTILS_VERSION_2_18 is not set # BR2_BINUTILS_VERSION_2_18_50_0_1 is not set # BR2_BINUTILS_VERSION_2_18_50_0_3 is not set # BR2_BINUTILS_VERSION_2_18_50_0_6 is not set # BR2_BINUTILS_VERSION_2_18_50_0_8 is not set # BR2_BINUTILS_VERSION_2_18_50_0_9 is not set BR2_BINUTILS_VERSION_2_19=y # BR2_BINUTILS_VERSION_2_19_1 is not set BR2_BINUTILS_VERSION="2.19" BR2_EXTRA_BINUTILS_CONFIG_OPTIONS="" # # GCC Options # # BR2_GCC_VERSION_4_1_2 is not set # BR2_GCC_VERSION_4_2_1 is not set # BR2_GCC_VERSION_4_2_2 is not set # BR2_GCC_VERSION_4_2_3 is not set # BR2_GCC_VERSION_4_2_4 is not set # BR2_GCC_VERSION_4_3_2 is not set # BR2_GCC_VERSION_4_3_3 is not set BR2_GCC_VERSION_4_3_4=y # BR2_GCC_VERSION_4_4_X is not set BR2_GCC_SUPPORTS_SYSROOT=y BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE=y BR2_GCC_VERSION="4.3.4" BR2_TOOLCHAIN_SYSROOT=y # BR2_GCC_USE_SJLJ_EXCEPTIONS is not set BR2_EXTRA_GCC_CONFIG_OPTIONS="" # BR2_GCC_CROSS_FORTRAN is not set # BR2_INSTALL_OBJC is not set # BR2_INSTALL_FORTRAN is not set BR2_GCC_SHARED_LIBGCC=y BR2_GCC_ENABLE_TLS=y # # Ccache Options # # BR2_CCACHE is not set # # Gdb Options # # BR2_PACKAGE_GDB is not set # BR2_PACKAGE_GDB_SERVER is not set # BR2_PACKAGE_GDB_HOST is not set # # Common Toolchain Options # BR2_LARGEFILE=y # BR2_INET_IPV6 is not set # BR2_INET_RPC is not set # BR2_ENABLE_LOCALE is not set # BR2_ENABLE_LOCALE_PURGE is not set # BR2_USE_WCHAR is not set BR2_PREFER_SOFT_FLOAT=y BR2_SOFT_FLOAT=y # BR2_USE_SSP is not set # BR2_PTHREADS_NONE is not set # BR2_PTHREADS is not set BR2_PTHREADS_OLD=y # BR2_PTHREADS_NATIVE is not set # BR2_PROGRAM_INVOCATION is not set # BR2_INSTALL_LIBSTDCPP is not set BR2_TARGET_OPTIMIZATION="-Os -pipe" # BR2_ELF2FLT is not set # BR2_MKLIBS is not set # BR2_PACKAGE_SSTRIP_TARGET is not set # BR2_PACKAGE_SSTRIP_HOST is not set # BR2_ENABLE_MULTILIB is not set BR2_CROSS_TOOLCHAIN_TARGET_UTILS=y # # Package Selection for the target # BR2_PACKAGE_BUSYBOX=y # BR2_BUSYBOX_VERSION_1_12_X is not set # BR2_BUSYBOX_VERSION_1_13_X is not set # BR2_BUSYBOX_VERSION_1_14_X is not set BR2_BUSYBOX_VERSION_1_15_X=y # BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set BR2_BUSYBOX_VERSION="1.15.2" BR2_PACKAGE_BUSYBOX_FULLINSTALL=y BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config" # BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is not set # BR2_PACKAGE_BUSYBOX_SKELETON is not set # # The minimum needed to build a uClibc development system # # BR2_PACKAGE_FLEX is not set # BR2_PACKAGE_GCC_TARGET is not set # BR2_PACKAGE_MAKE is not set # # Other development stuff # # BR2_PACKAGE_AUTOCONF is not set # BR2_PACKAGE_AUTOMAKE is not set # BR2_PACKAGE_BISON is not set # BR2_PACKAGE_CCACHE_TARGET is not set # BR2_PACKAGE_DISTCC is not set # BR2_PACKAGE_DMALLOC is not set # BR2_PACKAGE_FAKEROOT is not set BR2_HOST_FAKEROOT=y # BR2_PACKAGE_GETTEXT is not set # BR2_PACKAGE_LIBINTL is not set # BR2_PACKAGE_LIBGMP is not set # # gperf requires a toolchain with C++ support enabled # # BR2_PACKAGE_LIBMPFR is not set # BR2_PACKAGE_LIBTOOL is not set # BR2_PACKAGE_M4 is not set # # oprofile requires a toolchain with C++ support enabled # # BR2_PACKAGE_PKG_CONFIG is not set # BR2_PACKAGE_READLINE is not set # BR2_PACKAGE_PCRE is not set # # Other stuff # # BR2_PACKAGE_AT is not set # BR2_PACKAGE_BEECRYPT is not set # BR2_PACKAGE_BERKELEYDB is not set # BR2_PACKAGE_BSDIFF is not set # BR2_PACKAGE_CUPS is not set # BR2_PACKAGE_CUSTOMIZE is not set BR2_PACKAGE_FILE=y # BR2_PACKAGE_GAMIN is not set # # icu requires a toolchain with C++ support and WCHAR enabled # # BR2_PACKAGE_KEXEC is not set # BR2_PACKAGE_LIBCONFIG is not set # BR2_PACKAGE_LIBCONFUSE is not set # BR2_PACKAGE_LIBDAEMON is not set # BR2_PACKAGE_LIBELF is not set # BR2_PACKAGE_LIBEVENT is not set # BR2_PACKAGE_LIBGCRYPT is not set # BR2_PACKAGE_LIBGPG_ERROR is not set BR2_PACKAGE_LIBICONV=y # BR2_PACKAGE_LIBIDN is not set BR2_PACKAGE_LIBLOCKFILE=y # BR2_PACKAGE_LIBOIL is not set # BR2_PACKAGE_LIBSYSFS is not set BR2_PACKAGE_LOCKFILE_PROGS=y # # logrotate - disabled (requires wchar support) # # BR2_PACKAGE_LSOF is not set # BR2_PACKAGE_LTP-TESTSUITE is not set # BR2_PACKAGE_LTRACE is not set BR2_PACKAGE_MEMSTAT=y # BR2_PACKAGE_POPT is not set # BR2_PACKAGE_SCREEN is not set # BR2_PACKAGE_SHARED_MIME_INFO is not set # BR2_PACKAGE_STARTUP_NOTIFICATION is not set # BR2_PACKAGE_STRACE is not set # BR2_PACKAGE_SUDO is not set # # Database # # # Mysql client requires a toolchain with C++ support enabled # # BR2_PACKAGE_SQLITE is not set # # Text editors # # BR2_PACKAGE_ED is not set # BR2_PACKAGE_NANO is not set # BR2_PACKAGE_UEMACS is not set # # Networking # # # Networking applications # # BR2_PACKAGE_ARGUS is not set # BR2_PACKAGE_AVAHI is not set # BR2_PACKAGE_AXEL is not set # BR2_PACKAGE_BIND is not set # BR2_PACKAGE_BMON is not set # BR2_PACKAGE_BRIDGE is not set # # ctorrent requires a toolchain with C++ support enabled # # BR2_PACKAGE_DNSMASQ is not set # BR2_PACKAGE_DROPBEAR is not set # BR2_PACKAGE_ETHTOOL is not set # BR2_PACKAGE_HASERL is not set # BR2_PACKAGE_IFPLUGD is not set # # iperf requires a toolchain with C++ support enabled # # # iproute2 requires a toolchain with IPv6 support # # BR2_PACKAGE_IPSEC_TOOLS is not set # BR2_PACKAGE_IPTABLES is not set # BR2_PACKAGE_IW is not set # # Kismet requires a toolchain with C++ support enabled # # BR2_PACKAGE_L2TP is not set # BR2_PACKAGE_LIBCGI is not set # # libcgicc requires a toolchain with C++ support enabled # # BR2_PACKAGE_LIBCURL is not set # BR2_PACKAGE_LIBDNET is not set # BR2_PACKAGE_LIBEXOSIP2 is not set # BR2_PACKAGE_LIBMICROHTTPD is not set # BR2_PACKAGE_LIBNL is not set # BR2_PACKAGE_LIBOSIP2 is not set # BR2_PACKAGE_LIBPCAP is not set # BR2_PACKAGE_LIBSOUP is not set # BR2_PACKAGE_LIBUPNP is not set # BR2_PACKAGE_LINKS is not set # BR2_PACKAGE_LRZSZ is not set # BR2_PACKAGE_MIIDIAG is not set # BR2_PACKAGE_MROUTED is not set # BR2_PACKAGE_MUTT is not set # BR2_PACKAGE_NBD is not set # BR2_PACKAGE_NCFTP is not set # BR2_PACKAGE_NEON is not set # BR2_PACKAGE_NETPLUG is not set # BR2_PACKAGE_NETSNMP is not set # BR2_PACKAGE_NETSTAT_NAT is not set # # nfs-utils requires a toolchain with 'Enable RPC' selected # # BR2_PACKAGE_NTP is not set # BR2_PACKAGE_OLSR is not set # BR2_PACKAGE_OPENNTPD is not set # BR2_PACKAGE_OPENSSH is not set # BR2_PACKAGE_OPENSSL is not set # BR2_PACKAGE_OPENVPN is not set # # portmap requires a toolchain with 'Enable RPC' selected # # BR2_PACKAGE_PPPD is not set # BR2_PACKAGE_RP_PPPOE is not set # BR2_PACKAGE_PPTP_LINUX is not set # BR2_PACKAGE_PROFTPD is not set # BR2_PACKAGE_QUAGGA is not set # BR2_PACKAGE_RSYNC is not set # BR2_PACKAGE_SAMBA is not set # BR2_PACKAGE_SOCAT is not set # BR2_PACKAGE_SPAWN_FCGI is not set # BR2_PACKAGE_STUNNEL is not set # BR2_PACKAGE_TCPDUMP is not set # BR2_PACKAGE_DHCPDUMP is not set # BR2_PACKAGE_TN5250 is not set # BR2_PACKAGE_TTCP is not set # BR2_PACKAGE_UDPCAST is not set # BR2_PACKAGE_VPNC is not set # BR2_PACKAGE_VSFTPD is not set # BR2_PACKAGE_VTUN is not set # BR2_PACKAGE_WEBIF is not set # BR2_PACKAGE_WIRELESS_TOOLS is not set # BR2_PACKAGE_WPA_SUPPLICANT is not set # # Hardware handling / blockdevices and filesystem maintenance # # # dbus not available (need expat or libxml2) # # BR2_PACKAGE_DMRAID is not set BR2_PACKAGE_DOSFSTOOLS=y BR2_PACKAGE_DOSFSTOOLS_MKDOSFS=y # BR2_PACKAGE_DOSFSTOOLS_DOSFSCK is not set # BR2_PACKAGE_DOSFSTOOLS_DOSFSLABEL is not set # BR2_PACKAGE_E2FSPROGS is not set # BR2_PACKAGE_EEPROG is not set # BR2_PACKAGE_FCONFIG is not set # BR2_PACKAGE_FIS is not set # BR2_PACKAGE_LIBFUSE is not set # BR2_PACKAGE_GADGETFS_TEST is not set # BR2_PACKAGE_GVFS is not set # BR2_PACKAGE_HAL is not set # BR2_PACKAGE_HWDATA is not set # BR2_PACKAGE_I2C_TOOLS is not set # BR2_PACKAGE_INPUT_TOOLS is not set # BR2_PACKAGE_IOSTAT is not set # BR2_PACKAGE_LIBAIO is not set # BR2_PACKAGE_LIBRAW1394 is not set # BR2_PACKAGE_LIBUSB is not set # BR2_PACKAGE_LM_SENSORS is not set # BR2_PACKAGE_LVM2 is not set # BR2_PACKAGE_MDADM is not set # BR2_PACKAGE_MEMTESTER is not set BR2_PACKAGE_MTD=y # BR2_PACKAGE_MTD_UTILS is not set BR2_PACKAGE_MTD_UTILS_GIT=y # # MTD tools selection # # BR2_PACKAGE_MTD_DOCFDISK is not set # BR2_PACKAGE_MTD_DOC_LOADBIOS is not set BR2_PACKAGE_MTD_FLASHCP=y BR2_PACKAGE_MTD_FLASH_ERASE=y BR2_PACKAGE_MTD_FLASH_ERASEALL=y BR2_PACKAGE_MTD_FLASH_INFO=y BR2_PACKAGE_MTD_FLASH_LOCK=y BR2_PACKAGE_MTD_FLASH_UNLOCK=y # BR2_PACKAGE_MTD_FTL_CHECK is not set # BR2_PACKAGE_MTD_FTL_FORMAT is not set BR2_PACKAGE_MTD_JFFS2DUMP=y # BR2_PACKAGE_MTD_MKFSJFFS2 is not set BR2_PACKAGE_MTD_MTD_DEBUG=y BR2_PACKAGE_MTD_NANDDUMP=y BR2_PACKAGE_MTD_NANDTEST=y BR2_PACKAGE_MTD_NANDWRITE=y # BR2_PACKAGE_MTD_NFTL_FORMAT is not set # BR2_PACKAGE_MTD_NFTLDUMP is not set BR2_PACKAGE_MTD_SUMTOOL=y BR2_PACKAGE_MTD_UBIATTACH=y BR2_PACKAGE_MTD_UBICRC32=y BR2_PACKAGE_MTD_UBIDETACH=y BR2_PACKAGE_MTD_UBIMIRROR=y BR2_PACKAGE_MTD_UBIMKVOL=y BR2_PACKAGE_MTD_UBINFO=y BR2_PACKAGE_MTD_UBIRMVOL=y BR2_PACKAGE_MTD_UBIUPDATEVOL=y # # ntfs-3g requires a toolchain with LARGEFILE and WCHAR support # # # ntfsprogs requires a toolchain with WCHAR support # # BR2_PACKAGE_PCIUTILS is not set # BR2_PACKAGE_SETSERIAL is not set # BR2_PACKAGE_SMARTMONTOOLS is not set # BR2_PACKAGE_SYSSTAT is not set BR2_PACKAGE_UDEV_VOLUME_ID=y BR2_PACKAGE_UDEV_SCSI_ID=y # BR2_PACKAGE_USB_MODESWITCH is not set BR2_PACKAGE_USBMOUNT=y # BR2_PACKAGE_USBUTILS is not set # BR2_PACKAGE_WIPE is not set # BR2_PACKAGE_XFSPROGS is not set # # Audio and video libraries and applications # # BR2_PACKAGE_ALSA_LIB is not set # # asterisk - disabled (required openssl and mpg123) # # BR2_PACKAGE_AUMIX is not set # BR2_PACKAGE_FLAC is not set # BR2_PACKAGE_GSTREAMER is not set BR2_PACKAGE_LIBID3TAG=y BR2_PACKAGE_LIBMAD=y # BR2_PACKAGE_LIBMMS is not set # BR2_PACKAGE_LIBMPD is not set # BR2_PACKAGE_LIBOGG is not set # BR2_PACKAGE_LIBSNDFILE is not set # BR2_PACKAGE_LIBTHEORA is not set # BR2_PACKAGE_LIBVORBIS is not set BR2_PACKAGE_MADPLAY=y # BR2_PACKAGE_MPG123 is not set BR2_PACKAGE_MPLAYER=y # BR2_PACKAGE_SPEEX is not set # BR2_PACKAGE_SWFDEC is not set # # festival requires a toolchain with C++ support enabled # # # taglib requires a toolchain with C++ support enabled # # BR2_PACKAGE_VLC is not set # # Graphic libraries and applications (graphic/text) # # # text rendering libraries # # BR2_PACKAGE_NCURSES is not set # BR2_PACKAGE_NEWT is not set # BR2_PACKAGE_SLANG is not set # # text rendering applications # # BR2_PACKAGE_DIALOG is not set # # graphic libraries # # BR2_PACKAGE_DIRECTFB is not set # BR2_PACKAGE_FBDUMP is not set # BR2_PACKAGE_IMAGEMAGICK is not set # BR2_PACKAGE_JPEG is not set # BR2_PACKAGE_LIBART is not set # BR2_PACKAGE_LIBPNG is not set # BR2_PACKAGE_LIBUNGIF is not set # BR2_PACKAGE_LINUX_FUSION is not set # BR2_PACKAGE_PIXMAN is not set # BR2_PACKAGE_SDL is not set # BR2_PACKAGE_TIFF is not set # # busybox graphic applications # # # --> May be broken in busybox # # BR2_PACKAGE_FBV is not set # BR2_PACKAGE_FBSET is not set # # other GUIs # # # qt requires a toolchain with C++ support enabled # # # X.org requires a toolchain with WCHAR support # # # X libraries and helper libraries # # BR2_PACKAGE_ATK is not set # BR2_PACKAGE_CAIRO is not set # BR2_PACKAGE_PANGO is not set # BR2_PACKAGE_LIBDRM is not set # BR2_PACKAGE_LIBERATION is not set # BR2_PACKAGE_LIBGLIB12 is not set # BR2_PACKAGE_LIBGLIB2 is not set # BR2_PACKAGE_OPENMOTIF is not set # BR2_PACKAGE_FONTCONFIG is not set # BR2_PACKAGE_FREETYPE is not set # BR2_PACKAGE_TSLIB is not set # # webkit requires a toolchain with C++ support and WCHAR enabled # # # X Window managers # # # X applications # # BR2_PACKAGE_GOB2 is not set # BR2_PACKAGE_SYLPHEED is not set # BR2_PACKAGE_XPDF is not set # # Compressors / decompressors # # # libarchive requires a toolchain with WCHAR support # # BR2_PACKAGE_LZO is not set # BR2_PACKAGE_LZOP is not set # # lzma requires a toolchain with C++ support # BR2_PACKAGE_ZLIB=y # # Package managers # # BR2_PACKAGE_IPKG is not set # BR2_PACKAGE_PORTAGE is not set # # Interpreter languages / Scripting # # BR2_PACKAGE_LUA is not set # BR2_PACKAGE_MICROPERL is not set # BR2_PACKAGE_PYTHON is not set # # ruby requires a toolchain with WCHAR support # # BR2_PACKAGE_TCL is not set # BR2_PACKAGE_PHP is not set # # XML handling # # BR2_PACKAGE_EXPAT is not set # BR2_PACKAGE_EZXML is not set # BR2_PACKAGE_LIBXML2 is not set # BR2_PACKAGE_LIBXSLT is not set # # xerces-c++ requires a toolchain with C++ support enabled # # # Java # # BR2_PACKAGE_CLASSPATH is not set # # Games # # BR2_PACKAGE_GNUCHESS is not set # BR2_PACKAGE_PRBOOM is not set # # Target filesystem options # BR2_ROOTFS_PREFIX="rootfs" BR2_ROOTFS_SUFFIX="" BR2_ROOTFS_POST_BUILD_SCRIPT="" # # filesystem for target device # # BR2_TARGET_ROOTFS_CRAMFS is not set # BR2_TARGET_ROOTFS_CLOOP is not set BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_BLOCKS=0 BR2_TARGET_ROOTFS_EXT2_INODES=0 BR2_TARGET_ROOTFS_EXT2_RESBLKS=0 BR2_TARGET_ROOTFS_EXT2_SQUASH=y BR2_TARGET_ROOTFS_EXT2_OUTPUT="$(IMAGE).ext2" BR2_TARGET_ROOTFS_EXT2_NONE=y # BR2_TARGET_ROOTFS_EXT2_GZIP is not set # BR2_TARGET_ROOTFS_EXT2_BZIP2 is not set # BR2_TARGET_ROOTFS_EXT2_LZMA is not set BR2_TARGET_ROOTFS_EXT2_COPYTO="" # BR2_TARGET_ROOTFS_JFFS2 is not set BR2_TARGET_ROOTFS_UBIFS=y BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x1f000 BR2_TARGET_ROOTFS_UBIFS_MINIOSIZE=0x800 BR2_TARGET_ROOTFS_UBIFS_MAXLEBCNT=1650 BR2_TARGET_ROOTFS_UBIFS_OUTPUT="$(IMAGE).ubifs" # BR2_TARGET_ROOTFS_UBIFS_RT_NONE is not set # BR2_TARGET_ROOTFS_UBIFS_RT_ZLIB is not set BR2_TARGET_ROOTFS_UBIFS_RT_LZO=y BR2_TARGET_ROOTFS_UBIFS_NONE=y # BR2_TARGET_ROOTFS_UBIFS_GZIP is not set # BR2_TARGET_ROOTFS_UBIFS_BZIP2 is not set # BR2_TARGET_ROOTFS_UBIFS_LZMA is not set BR2_TARGET_ROOTFS_UBIFS_COPYTO="" # BR2_TARGET_ROOTFS_SQUASHFS is not set # BR2_TARGET_ROOTFS_TAR is not set # BR2_TARGET_ROOTFS_CPIO is not set # BR2_TARGET_ROOTFS_INITRAMFS is not set # BR2_TARGET_ROOTFS_ROMFS is not set # # bootloader for target device # # BR2_TARGET_UBOOT is not set # # Kernel # BR2_KERNEL_none=y # BR2_KERNEL_LINUX_ADVANCED is not set # BR2_KERNEL_LINUX is not set how to use it: get buildroot-2009.11 source code,go to root dir: 0. put as353x_config into the root dir. 1.type: make menuconfig 2. choose "Load an Alternate Configuration File", type : as3536_config then "Save an Alternate Configuration File" to type : .config then exit . 3. make all should be OK. Buildroot buildroot, buildroot-2009.11

Nov 11, 2007 - If this variable is set to yes, then usbmount will utilize NTFS-3G instead patch /usr/share/usbmount/usbmount path /usbmount-ntfs3g.patch.

Sep 13, 2014 - Package: usbmount Version: 0.0.22 Severity: wishlist Tags: patch Dear with NTFS filesystems and the user-space filesystem NTFS-3g, since.

buildroot-2009.11编译全过程 之 config文件